TP-PS25
Control Method：2-way, 3-port, proportional control
Power off：fuel flows from port A to port T
Power on：fuel flows from port P to port A
Application：Proportional pressure reduction control devices
| Working Voltage： | DC24V/DC12V《Optional》 |
| Working Current： | 0~750mA（24V）/0-1500mA（12V）《Optional》 |
| Drive Frequency： | 150Hz（Current Control） |
| Maximum Fuel Port Pressure： | 50bar |
| Maximum Flow： | 3.8L/min（Throttle Cap Optional/pressure difference between fuel inlet and fuel outlet is @6bar） |
| Adjusting Pressure Range： | 0~25bar |
| Response Time： | T open ≤30ms；T close ≤30ms |
| Hysteresis： | ≤4% |
| Linearity： | ≤5% |
| Pressure Characteristics： | see ” Functional Chart”（The test data is P port pressure 40bar） |
| Flow Characteristics： | see ” Functional Chart” |
| Internal Leakage： | ＜30ml/min |
| Port P Filter Specifications： | 125μm |
| Usage Environment Temperature: | -30℃ to 90℃ |
| Usage Medium Temperature： | -30℃ to 120℃ |
| Usage Medium Viscosity Range： | 5~500cSt mineral oil or lubricating synthetic oil |
| Installation： | Bolts fastening，tightening torque 4~6Nm |
| Coil： | 12V/24V "optional", consult the factory for detailed parameters |
| IP Functions： | IP69K |
| Protective Properties： | Waterproof, Explosion-proof, Anti-corrosion |
Drawing(Connector:Deutsch)
Drawing(Connector:AMP Junior)
Ordering Code
| TP-PS25-25-12-J-H-0 | 96419 | TP-PS25-25-24-J-H-0 | 96028 | |
| TP-PS25-25-12-D-H-0 | 96420 | TP-PS25-25-24-D-H-0 | 96415 |
Add.：NO.5-3，CHENGNAN 1ST ROAD,CUISHAN LAKE NEW DISTRICT, KAIPING CITY，GUANGDONG，CHINA
Tel.：86-750-2882555 /2880222
Fax：86-750-2880230
MSN：diesel@ishino.cn
Email：zym@ishino.cn
0
